iPP machine for high speed packaging

Product introduction

High end and high speed

1.Super fast injection speed meet the high requirements in packaging industry.
2.Excellent system design make the machine always controllable.
3.Incomparable cycle time with better  repeat precision of the products.

Creative injection unit design

1.Electrical plasticization by European servo motor.
2.Single injection unit makes the fast and accurate injection possible with speed up to 1000mm/s.
3.Charging by European servo motor work with the accumulator, make the power always ready.

Clamping design special for packaging purpose

1.High rigidity platen design meet the fast requirements for packaging industry
2.The clamping movement always on the perfect working condition benefit from the accumulator.
3.Reserved sufficient interface for automation system like IML.

MAIN TECHNICAL FEATURES

iPP high speed injection machine for packaging purpose UNIT IPP150 iPP200 iPP260 IPP300 IPP400
INJECTION UNIT
注射单元
Screw L/D Ratio 螺杆长径比 L/D 25 25 25 25 25
Screw Diameter 螺杆直径 mm 45 50 60 60 70
Shot Weight (PP) 射出量(PET) g 230 323 575 575 875
Injection Speed (max) 注射速度(最大) mm/s 1000 1000
CLAMPING UNIT
合模单元
Clamping Force 锁模力 T 150 200 260 300 400
Clamping Stroke 移模行程 mm 490 550 550 580 600
Max/Min Thickness of Mould 最大/小模厚 mm 175~510 250~650 250~700 350~1000 500~1100
Space Between Tie Bars(WxH) 导杆间距(宽 × 高) mm 510 × 510 670 × 670 650 × 650 780 × 780 920 × 920
Ejector Stroke 顶出行程 mm 125 150 150 200 200
Ejector Force 顶出力 T 5 8 8 10 10
NO. of Ejector Pins 顶出杆根数 pcs 5 5 5 5 10
SYSTEM
系统
Max system pressure 最高系统压力 kg/cm2 160 160 160 160 160
POWER UNIT
电气单元
Main Motor Power 主马达功率 kW 35 44 56 74 84
Plasticization Motor Power 溶胶马达功率 kW 44 54 58 58 71
Heater Input Capacity 熔胶电热容量 kW 18 23 28 28 32
其他 Machine Size(LxWxH) 主机外型尺寸(长x宽x高) cm 600*180*180 700*180*180 800*200*200 900*220*220 950*220*220
Machine Weight 整机重量 T 8 10 12 17 25

*Demark reserves the right to make changes to the products and specifications are subject to change without notice.